Routerlogin.net not working is one of the common issues you may experience while accessing the Netgear router. There might be many reasons behind the upcoming of this issue, So, here we are providing you some vital information through which you can easily resolve routerlogin.net not working issue. Just read the information carefully.
Check for any damage to your hardware
First and foremost, you need to check that the hardware you are using is in good condition. Make sure that the Netgear router and other devices you are using are not broken. Check the condition of the Ethernet cable as well. Sometimes using a damaged or worn-out cable can be the reason for the issue.
Check the version of your Internet browser
You need to make sure that you are using an updated version of your Internet browser. Users, at times, face issues when they access the routerlogin.net through the outdated version. If your web browser is up to date and you are still facing the issue then try switching to the other web browser.
Check your Internet connection
You need to ensure that you are getting proper internet speed from the ISP. You can verify the speed of your internet connection by conducting the speed test on the other device. If it’s working fine, then check your device if it’s getting proper signals to from the router. If not, then place your device within the range of your modem networks.
Use the correct URL for Netgear router login
Always cross-check the URL you entered in the address bar before pressing the Enter key. Sometimes, you can get an issue when you accidentally type an incorrect URL for the Netgear router login If the issue persists, then you can try to access Netgear router login page via the default IP address.
Check the connection between your devices
Make sure that your all device are well connected. If you use a physical connection then you must need to verify that the cable you are using is not damaged and avoid loose connections between the devices. If you using a wireless connection, then make sure that your all devices are properly connected. You can verify the connection by checking the LED lights. If the LED lights are blinking green then your device is properly connected.
Perform Netgear router firmware update
Always check for the latest version of the Netgear firmware. Sometimes you can get an issue while accessing the Netgear Router Login page through the old version of the Netgear firmware. We suggest you always check for the Netgear router firmware update. And Ensure that you are not using a broken version of the Netgear router firmware to avoid the issue.
Factory Reset of your Netgear Router
After executing these above-mentioned steps if you encounter the same issue, then we suggest you perform the complete factory reset of your Netgear Router. Here, we are providing you with step-by-step instructions to perform the Netgear reset without any hassle.
On your Netgear Router, located the Reset button.
Then, press and hold the Reset button till the LED starts blinking.
Wait for some time, your Netgear router will restart automatically
Finally, you have successfully executed the complete factory reset of your Netgear device.
Important Note; Note down all the settings made by you as all the customized settings will be removed once you are done with the Netgear router factory reset.
Hopefully, this above-given information proved to be useful for you. Leave a comment to let us know about your feedback.
Read More: Getting Netgear Router Red Light Error? Let’s Get That Fixed!
