“I performed Netgear router setup at home so that I can gain access to a blazing-fast internet connection. But, my router is not connecting to internet. What was even the point of setting it up when I had to get stuck with internet-related issues? Can you guide me about how to troubleshoot the issue?”
If your mind is boggling with a similar situation, you should consider yourself lucky that you landed on this post. Here, we have talked about various troubleshooting tips that will help you fix the Netgear router not connecting to internet issue in a jiffy. Read on.
Fixed: Netgear Router Not Connecting to Internet
Reboot Your Netgear Router
Do not opt for any other troubleshooting hack yet. First, consider rebooting your Netgear wireless router. Here is how you can do that:
Power off your Netgear wireless router.
Unplug it from its electrical outlet.
Wait for a couple of seconds.
Plug your Netgear router back into the wall socket.
Press the Power button.
Now, try to access 192.168.1.1 and check whether you are still facing the Netgear router not connecting to internet issue. If you are, then continue reading.
Verify Ethernet Connection
There is a possibility that the Ethernet connection between your Netgear wireless router and the existing modem is not secure. And that might be because you have used a damaged Ethernet cable to connect your devices.
But, fret not because we can help you rectify your mistake. Either get your Ethernet cable replaced with a brand new one or connect your devices using a wireless source.
Bring Your WiFi Devices Closer
If you are still not able to access 10.0.0.1 due to a bad internet connection, then it might be because the distance between your Netgear wireless router and the existing modem is too much. So, what to do in order to troubleshoot the issue?
Well, it’s simple. Place your Netgear wireless router in the same room as that of the modem so that they can transmit signals without any hassle.
Contact Your ISP
Chances are that your Internet Service Provider is not doing his job properly. Think about it, it could be a possibility that the internet issue from his end, right?
To confirm the same, reach out to your ISP. Does he agree that the internet issue is from his end? Well, in that case, give him a couple of hours to get it fixed.
Avoid WiFi Interference
WiFi interference is another major factor that might be stopping your Netgear router from connecting to the internet. Therefore, make sure that your router is kept away from:
Once you’ve kept WiFi interference at bay, try to access the 192.168.1.0. What happened? Are you still going bonkers because of the Netgear router not connecting to internet issue? Well, that can’t be good.
Reset Your Netgear Router
If you are reading this point, it means that none of the aforementioned tips helped you fix the Netgear router not connecting to internet issue. Well, we hope that at least resetting your device will resolve it for you.
Here are the guidelines that you need to follow in order to restore your Netgear wireless router to the factory default settings:
Look for the Reset button located on your Netgear WiFi router.
Found? Great! Now, take a sharp object and press the Reset button using it.
Wait for a few seconds.
After some time, your Netgear router will get reset. Now, reconfigure your device by accessing 192.168.1.2.
Coming across the Netgear router not connecting to internet issue is quite common. However, troubleshooting it is not. If you take the help of the tips mentioned above, there is nothing in the world that can stop you from the resolving the issue you are facing right now.