Last Updated on July 30, 2022 by rabiamuzaffar
Netgear Orbi routers are the best networking devices in the WiFi industry nowadays. Do you know why? Because of the satellites that come with them. But, what if your Orbi router is not able to connect to the satellite; will it be of any use? Of course not! To help you get rid of the issue, we have penned this article.
Here, we have summed up some of the topmost troubleshooting hacks that will surely help fix the Netgear Orbi router not connecting to satellite issue in the blink of an eye. So, dig in.
Fixed: Netgear Orbi Not Connecting to Satellite
Reboot Your Orbi Router
Technical glitches are one of the major reasons why you are experiencing the Netgear Orbi router not connecting to satellite issue. To get rid of these glitches, you need to reboot your WiFi device. Here’s how:
- Power off your Orbi router and unplug it from the wall socket.
- Wait for a couple of seconds.
- Plug your Netgear Orbi router back into its wall outlet and press the Power button.
If needed, reboot your Netgear Orbi satellite along with the router too.
Press the Sync Button
Before you do anything else, check whether you have pressed the Sync button on your Netgear Orbi router and the satellite. If not, then do the honors right now.
Hopefully, this hack will resolve the Netgear Orbi router not connecting to satellite issue. On the off chance, it doesn’t, follow the next one.
Update Firmware
An outdated firmware can also lead you to the Netgear Orbi router not connecting to satellite issue. Therefore, update the firmware of your wireless device to the latest version via orbilogin.net.
If you are not sure about the process to perform Netgear Orbi firmware update, then it is recommended that you refer to the user manual.
Bring Your Orbi Devices Closer
Chances are that the distance between your Netgear Orbi router and the satellite is too much which is preventing them from connecting.
Thus, unplug your Orbi router from its wall socket and plug it into the one which is closer to the satellite. Now, try to connect your router to the satellite and access orbilogin. Are you able to? Well, that is unfortunate. But, worry not. We still have a couple of troubleshooting steps that can help you fix the issue.
Get Rid of Signal Interference
If the signals of your Netgear Orbi router and the satellite are getting interrupted or blocked, then also they can perform poorly. So, how to fix the issue? Well, it’s simple. Relocate your Netgear Orbi router and satellite.
Make sure that your Netgear Orbi devices are not placed anywhere near:
- Cordless Phones
- Mirrors
- Washing Machines
- Fish Tanks
- Baby Monitors
- Treadmills
- Refrigerators
- Televisions
- Microwave Ovens
- Aluminum Studs
- Bluetooth speakers
- Utensils Containing Water
- Corners
- Concrete Walls
Did you still have no luck in troubleshooting the issue at hand? Well, in that case, reset your Netgear Orbi device.
Reset Your Netgear Orbi
Follow the below-mentioned guidelines mentioned below in order to perform Netgear Orbi factory reset:
- Look at all sides of your Orbi router and find the Reset button.
- Once found, carefully press it using a sharp object.
- Wait for a couple of seconds.
After the Reset process comes to an end, perform Netgear Orbi setup via orbilogin.com.
Wrap Up
If your Netgear Orbi router is not connecting to satellite, your router is good for nothing. But, thankfully, the aforementioned troubleshooting tips will help you get rid of the Orbi router not connecting to satellite issue. So, sit back and relax.
Read more: Getting Netgear Router Red Light Error? Let’s Get That Fixed!