Last Updated on June 19, 2023 by Touseef Umair
If you are trying to update the firmware on your Netgear extender, then we assume you know how important it is to keep your extender updated. But not being able to complete the task at hand can be infuriating. But fret not! We have penned down the troubleshooting hacks that will help you fix the Netgear extender firmware update failed issue easily. It is not at all a daunting task to get the firmware on the extender updated. You simply need to access the mywifiext local web page and get the process done. But there must be something that you are doing incorrectly. Let us see what that is!
Troubleshooting Netgear Extender Firmware Update Issues
Download the Correct Firmware
Before you install the firmware on the extender, you need to download it from the Netgear website. If you are downloading an incorrect file, you will face trouble uploading the file. So, make sure that you download the correct file that is meant for your extender. It depends upon the extender model that you own. Thus, ensure downloading the correct firmware file and save it at a safe location on the PC.
Upload the Correct File
After downloading you need to access the Netgear extender login page and upload the file. While uploading, make sure you choose the correct file that has been saved by you on the PC. If you choose an incorrect file then the firmware update process will be hampered. You might also brick your extender with this. Thus be vigilant while installing the firmware on the extender.
No Power Supply Issues Allowed
The extender should be receiving a proper power supply while the firmware uploading process is going on. Check the power socket into which the extender is plugged. It should be free of damage. Also, the power adapter needs to be plugged in firmly and not loosely into the socket. If your area suffers power outages a lot, consider using a UPS.
Ensure Stable Internet Connection
The extender as well as the device which is being used to upload the firmware should be accessing an optimum internet connection. For this, you can choose a wired medium to connect the Netgear WiFi extender to the host router. This will ensure a minimum signal loss. Also, bringing the extender closer to the router will improve the signal quality. But do not place them neck to neck else you will fall into another pit of issues.
Do Not Interrupt the Process
The firmware update process should not be interrupted under any circumstances. To ensure this, we have already mentioned the power supply and internet connection. Other than this, here is what you can do: Do not open any tab on the browser or do not play games online during the firmware update process. In other words, you should be on the Netgear Genie setup wizard all the time.
Use the Correct Steps
To update the firmware on the Netgear range extender, you should follow the correct instructions. Make sure you do not miss out on any step in between or perform any step incorrectly. Though you can use the user manual wherein you will find the instructions, we have mentioned the instructions here, for your convenience:
- Power up the PC.
- Download the correct firmware file for your extender and save it on your computer. Unzip the file, if needed.
- Now access the Netgear extender login page by inputting the login URL in the URL bar of the web address and logging in using the login credentials.
- Once you land on the Netgear Genie setup wizard, get to the settings of the extender.
- Click on the Firmware Update and then click on the Browse button. Locate the file that was saved by you on the computer.
- Click on the Upload button finally and the firmware uploading will begin.
- Wait till the process gets completed.
Also Read: Let’s Fix the Routerlogin.net Not Working Issue Now!
To Briefly Conclude
Here we conclude our article about how to fix the Netgear extender firmware failure issue. Once the firmware is updated, your extender’s performance will be enhanced. This process is also known to fix bugs. Thus, if you are experiencing any issues with the extender like slow and intermittent network, www.mywifiext.net refused to connect, or any other similar issue, then considers updating the firmware of the extender to fix the issue at hand.
Apart from this, if you are interested to know more about intermittent network then visit our Business category.
