Choosing the right well and pump company for your home will depend on several factors. This includes how deep or shallow your well is. You’ll also need to consider whether you want to install a jet or submersible pump. There are also sediment filters to consider, and it’s a good idea to test your water regularly to make sure it’s high-quality.
Submersible vs. Jet Pumps
Many different types of pumps can be used for your well. These include submersible and jet pumps. It would help if you decided which type is right for your home.
If you are installing a new pump, you will want to choose the best pump for your situation. This includes the amount of horsepower it needs. Getting a pump that needs to be more powerful will result in hours of repair and maintenance. It is also important to select a pump that will last for a long time.
Generally, you can determine the horsepower of your pump by calculating the total lift head (TLH) and the gallons per minute (GPM). The TLH is the total amount of water drawn up vertically.
Typically, the more horsepower you have, the faster the pump will draw water up. However, this can vary depending on the depth of your well. Therefore, it is important to talk to a professional well-drilling expert to help you determine the best pump for your home.
Shallow Vs. Deep Wells
When choosing the right well and pump company, it’s important to keep in mind the various features available. These include a booster pump, water pressure, and a water table. A professional advisor from a well and pump company Naples, FL can also help you choose the best system for your particular needs.
The most common types of pumps are jet and submersible. In addition to these, there are other types of pumps, such as air-driven and manual pumps.
To determine which type of good pump is right for your home, you first need to determine how deep your water table is. This is done by measuring how far water must travel to reach the surface. Generally, shallow wells require a smaller pump than deep wells.
Submersible pumps are ideal for shallow wells. They are waterproof and easy to maintain. However, they can be expensive to install. Also, they are typically more efficient at handling deeper wells.
Jet pumps are a popular choice for deep wells. They draw water from a depth several hundred feet below the surface. As a result, they can deliver more water faster than ordinary pumps.
Check the Quality of Your Well Water Regularly
Keeping track of the quality of your well water is crucial. Well water can be affected by local contaminants, land use, and household changes.
Several types of contaminants have been linked to health problems. These include microbes, pesticides, and inorganic chemicals. If you have concerns, check with your state or local health department for information on well testing.
A basic water quality test will identify the most common contaminants. However, if you have questions about specific chemicals or contaminants, consider consulting a professional laboratory.
In addition, you should test your water for more than just bacteria and nitrate. For example, you should test your well for radium and arsenic. These compounds can cause serious health problems, especially for children. You should also check your water for coliform bacteria, which are found in surface water and warm-blooded animals.
The frequency of your testing will depend on the type of contaminant you are concerned with. Some contaminants are easily detectable, while others are not.
Consider Installing a Sediment Filter
If you have yet to consider installing a sediment filter for your home, you’re missing out on a lot. A sediment filter is an easy way to ensure that you have clean, safe drinking water. It can also reduce the maintenance you need to do on your water treatment equipment.
Sediment filters come in two main types, namely spin-down and cartridge. Spin-down sediment filters are designed to be cleaned by simply flushing with water. They’re ideal for whole-house filtration. However, they must be periodically re-cleaned. Cartridge systems use pleated paper media or polyester media to filter.
When choosing a sediment filter, make sure to choose one with a micron rating that matches the size of the particles in your water. This will allow the filter to trap smaller particles and prevent them from plugging up.
For most homes, a 20-micron sediment filter will work fine. But if you need to filter even smaller particles, you’ll need a larger micron rating.
