So you have performed the Linksys router setup by accessing the Linksys router login page? Now you are looking to enhance your Linksys router performance. Well, we get you. We have come up with the topmost solutions that will help you enhance the Linksys router performance. After following the tips and tricks given here, you will be able to enjoy trouble-free and high-speed internet access throughout your home. Keep reading further to learn how to boost your Linksys router WiFi performance.
Linksys Router Performance Improvisation Process
We are going to provide you with different methods that will help you do what you are intended to do. Know that you can follow one or more than one methods to get the job done. It all depends on you. All of the methods are known to enhance the router’s performance to a great extent. So, give them a shot and see the difference for yourself.
Method 1: Allow it Some Rest
Like every technical device, Linksys router also needs some rest. But because we have to be online the whole time, we forget this very point. We keep using the router and then it gets overheated. So, it is time to give it what it needs the most. Yes! A rest. Power off your router and let it cool down for a while. Maybe for 5 minutes. Also, disconnect all the cables that are connected to it. After that connect back the cables the same way and power it up. Right after the Linksys router is booted up completely after this process, try accessing its network. Is it better now? It sure would be. To further enhance the network try some other methods.
Method 2: Bring it Near Host Gateway
The Linksys router should be connected to the host gateway. This means the router receives the network from the modem or the host gateway and then produces a WiFi signal. For optimum performance of the router, it should be placed within the modem’s network range. Thus bring the router closer to the modem. But you are not supposed to bring them very close such that their signals begin clashing.
Method 3: Update its Firmware
It is recommended by Linksys that the firmware of the devices should always be running on the recent version to get the best out of them. We suggest you update the firmware of your router now. You simply need to download the latest version meant for the Linksys router model that you own and then get it installed on the router by accessing the login page. By updating the firmware, you get an overall performance enhancement. Don’t trust us? Try it!
Method 4: Eliminate Interference
It is to be noted that your Linksys router should not be placed in a place where any other devices that can interfere with its network are placed. Such devices or appliances are Bluetooth speakers, cordless phones, microwave ovens, etc. Apart from this, you should place the router in an open place and not in some corner of the home.
Method 5: Change the Connection Mode
How have you connected your Linksys router to the modem? Is it a wireless connection? Well, it is now time to alter the connection mode. Use a wired connection now. It is much more reliable that a wireless connection. You need to get one Ethernet cable for this. But make a solid connection by the way. No loose connections allowed.
Method 6: Disconnect Extra Devices
If you have more devices that are accessing the router’s network then try disconnecting a few of them. We understand that many devices or appliances in our homes need an internet connection to operate. But if there are more than the required pre-assigned amount of devices accessing the router network, the quality of the network is bound to reduce. So disconnect some which are not really necessary.
Also Read: Netgear Satellite Not Found? Let’s Fix It!
Conclusion
This is all about how you can boost the performance of your Linksys router. These methods work well with all the router models. We also recommend you invest in a wireless range extender. If you have a big house with a large area or a multi-storeyed building, or if you need to access WiFi outside your home or backyard, then an extender can help. Simply get it installed by accessing http://extender.linksys.com web page and get rid of any WiFi dead zones in the home.
